Maglite 4 D Cell Light Saber Conversion STL Kit

This is my Maglite complete chassis for the 4 D-cell Maglite with nurled band on the lens housing.

Main Chassis/fits a Proffieboard v2 and a 31mm speaker
Switch/pcb chassis…stays in hilt (needs mounting scew aplication)
Charge port housing
28mm speaker adaptor
Pommel insert for TCSS Maglite pommel cap
3 tray adaptors for GHV3, Verso, CFX
Crystal Chamber
Crystal

PARTS TO GET LIST:

Chassis accomodates SHTOK V1-V3 neopixel pcb’s

https://www.thecustomsabershop.com/D-cell-Maglite-blade-holder-P514.aspx

https://www.thecustomsabershop.com/D-cell-Maglite-MHS-pommel-adapter-P852.aspx

https://www.thecustomsabershop.com/18650-Single-Cell-Holder-P886.aspx

https://www.thecustomsabershop.com/Switchcraft-21mm-Power-Jack-P1775.aspx

https://www.etsy.com/listing/884407969/so-removable-chassis-14-pin-pcb-set?click_key=5ec04b2c2042a7862d8c65f9345d103cd5ed95ef%3A884407969&click_sum=899ca064&ref=hp_from_purchased_shops_2-4&sts=1

https://thesaberarmoryusa.com/products/31mm-4ohm-3w-bass-speaker

OR
FOR USE WITH ADAPTOR
https://www.thecustomsabershop.com/3W-28mm-Uber-Series-X-Speaker-P1878.aspx

NOTE: Some parts will need a bit of sanding, sizing and glue. Most parts will fit as required. Glue is required for permanent application. E 6000 is best to use. PCB’s and speaker should be glued in…or your at own descretion. If you would like This printed, check out my other listing for the printed version.